BarnStudio was unable to forget about UDP ports in Services tab
Add UMD v5.0 clients to BarnMini-05 (firmware v1.2.19)
v1.2.0.4
Update .NET version from 4.6 to 4.8
Disable the prediction when typing IP-address, it made it hard to type
v1.2.0.2
Update the Icons.
BTF1-41, removing daughterboards didn’t work as expected
v1.1.1.0
Multicast discovery could fail to receive some if BTF1-xx frame if of these criteria are true:
Firmware prior to v1.2.3
No IPv4 address is assigned
Only IPv4 multicast is used
v1.1.0.1
Do not display “Hostname can not be empty” when creating network configuration for older devices.
v1.1.0.0
Add Matrix LockDown (requires new firmware on BTF1-x frames).
In the service tab, as clients were disconnected, BarnStudio GUI wasn’t updated.
v1.0.7.0
Network settings: if a device has support for Hostname setting, give a visual error if left empty and if creating a new configuration, prefill it with a valid text.
v1.0.6.13
Add support for configuring BTF1-xx firmware 1.0.x NTP-server, Hostname and 802.1x authentication.
When using groups in the Devices view, restarting BarnStudio would cause devices to go invisible
v1.0.6.2
BTF1-41 now supports OneShot and toggling GPO
v1.0.5.5
BTF1-10-AA-MADI visual tool now shows and can manipulate the main matrix in the frame
Input and Output port list tabs can now show and can manipulate the main matrix in the frame
Support for BTF1-xx Tally Client (you might need to restart BarnStudio if you recently update the firmware in a frame to display this)
v1.0.5.2
BarnMini-05 has a new UART mode of operation, “RS485 no echo”
v1.0.5.1
New BTF1-xx firmware now report uptime
New BTF1-xx firmware, has changed a detail in the signal analyzer API (SD-SDI can ignore EDH errors)
v1.0.5.0
Tooltip in the network configuraion dialog is now more userfriendly
“Services” tab, which will be visible after the release of BTF1 0.5.0 firmware
v1.0.4.20
Total redesign of device tree, now supports MultiSelect/MultiDelete
Extra device online status moved from device list, into the “Basic information” tab
“Take Indefinitely” is now an option
“TSL Tally Server” added for BTF1 frames
v1.0.4.7
Improve support for BTF1-41 and its SFP daughterboard
BTF1-10AA AudioMatrix did not work as expected in previous release
Initial support for BTF1-xx TSL tally server
Visual indication in the “Multicast Search Scope” if a network adapter is active or not
Auto take now has a new time limit: indefinitely
Load/Save dialogs have tri-state support per include option now
Device list has a complete overhaul
v1.0.4.6
BarnMini-05 now has fewer possible TCP/IP concurrent connections on UART
BTF1-10AA audio matrix was no longer able to change the audio matrix
v1.0.4.4
BarnMini-22 can now be connected via SNMP
For remote connected devices, the “network configuration” view would remember the previous selected device (until New or Download) was clicked
v1.0.4.2
BarnMini-22 v1.0.7 firmware reconnects on reclocker status changes
v1.0.4.1
Automatic software update, didn’t understand that version 1.10 is larger than 1.9
v1.0.4.0
Use .NET version 4.6 instead of 4.0. This removes support for Windows XP and Windows Vista.
Minor tweaks to the UI, and added some more tooltips
Network configuration file editor now points out that you should download the configuration from the device
BarnStudio can now check for software and firmware updates
Added support for BTF1-41, including a GPIO script editor
Fixes in the Load configuration to device feature
v1.0.3.1
BarnMini-05 GPIO Close/Open button didn’t work anymore
v1.0.3.0
Start-Menu is now placed inside “All Users” instead of the current user
SwitchBack To Main was not possible to disable inside AutomaticChangeOver dialog
Add the posibility to Load/Save configurations of BTF1 frames to/from files
Show SFP RX/TX power when viewing Input/Output tab
Add support for BarnMini-22
v1.0.2.6
Support for BTF1-10-AA-MADI frame
Support for Ping-Client inside BarnMini-05
Support to select DMX-512 as UART serial mode in BarnMini-05
Support for display OM4 fiber lengths for SFP modules
Fix some crashes that could happen when removing BTF1 SNMP devices
UI for Telnet-Driver devices go out of sync with device config, fixed (trigged by doing multiple changes to same parameter without “Take”, and at some time reconnect the device)
Reusing an old device in the device tree to connect to a new different device, failed to give the proper error-message in the log.
v1.0.0.0
The application now has a dark theme on versions of Windows
Control of the LED behind the logo on the new mechanical frames
Support for BarnMini-05
Telnet devices, the take list could go out of sync when frame multiple clients configured the same parameters at the exact same time
Display firmware version on the basic information time
Factory reset button for BarnMini-05 and BTF1-x (telnet driver)
v0.4.0.3
Do not crash when trying to spawn IPv6 connection to a Telnet enabled device on non-IPv6 enabled systems
v0.4.0.2
Fallback to multicast when configuring network did not work for BTF1-x telnet protocol
v0.4.0.0
Support for BTF1-x telnet protocol (new discovered frames with new firmware will use this protocol)
Some rare occasions of “unhandled exception” was fixed
Display automatic changeover (requires new firmware on the BTF1-x frame)
v0.3.0.0
Internal redesign, making future changes easier
All configuration changes now needs to be acknowledged, but can be temporary bypassed.
BarnStudio now remembers devices between sessions
New UI for adding non-discoverable / remote devices
Matrix sometimes could appear empty first time per device, fixed
Display SDI analyzer if BTF1-xx firmware is new enough
v0.2.0.8
BarnStudio assumed it would always find an IPv6 scope to use, even on systems that did not provide IPv6 support
v0.2.0.7
Network tab can now display the log generated from a BTF1-XX frame
v0.2.0.6
Alphabetically sorting of SFP properties and diagnostics
Improve the responsiveness of the matrix view
v0.2.0.5
Matrix view has a new design
Support for SNMP traps (new feature in latest BTF1-xx firmware)
